Copyright (c) Hyperion Entertainment and contributors.

SDK Developer Tools

From AmigaOS Documentation Wiki
Jump to navigation Jump to search

Contents

Introduction

The Software Development Kit (SDK) contains a suite of software tools to aid developers in making software for AmigaOS.

AutoDoc

AutoDoc extracts and sorts autodocs from the given files and prints them in the standard output.

Tool Types

(none)

Shell Usage

Format
AUTODOC [-t <number>] [-i] [-o] [-a] [-s] [-C] [-l <length>] [-w] [-c] [-f] [-r] [-F <file>] [-I] {<infile>}
Template
[-t number] [-i] [-o] [-a] [-s] [-C] [-l length] [-w] [-c] [-f] [-r] [-F file] [-I] {infile}
Location
SDK:C

The options are:

{<infile>} List of files to be processed.
-t<number> Turn tabulators to given number of spaces.
-i Process only INTERNAL autodocs.
-o Process only OBSOLETE autodocs.
-a Do not process autodocs starting with an asterisk.
-s Process autodocs starting with a semicolon.
-C Process autodocs starting with "/*". This is the default setting.
-l<number> Set the line length for the output. The default is 78.
-w Turn off word wrapping.
-c Do not convert "\*" to "/*" or "*\" to "*/".
-f Do not add form feeds between the autodoc entries.
-r Generate Troff source output.
-F<file> Use <file> as a temporary file. The default temporary file is "tmpfile".
-I Do not print "Table of Contents" before entries. If omitted, "Table of Contents" will be printed after the entries.
Example

Extract autodocs from files "main.c" and "functions.h" and redirect AutoDoc's output to file "MyDocs.doc".

1> autodoc -a -C main.c functions.h >MyDocs.doc

ARexx Interface

AutoDoc has no ARexx interface.

BuildLanguageCT

This tool generates a catalog translation file (CT file) from the current system language driver.

A new language.catalog can be created with a CatComp tool using the generated CT file and a language catalog description file (located in "SYS:Locale-Source/language.cd").

Tool Types

(none)

Shell Usage

Format
BUILDLANGUAGECT
Template
(none)
Location
SDK:C
Example 1

List the current language driver strings.

 1> BuildLanguageCT
Example 2

Create a "language.ct" file with the built-in strings of the current system language driver.

 1> BuildLanguageCT >language.ct

ARexx Interface

BuildLanguageCT has no ARexx interface.

BuildMapTable

BuildMapTable converts Charset-To-Unicode mapping tables in text form (e.g. available at http://www.unicode.org/Public/MAPPINGS/) to mapping tables in binary form usable by diskfont.library.

BuildMapTable can either display a text form of the parsed table or create a binary mapping table in the "L:Charsets/" directory. Currently only 8-bit character set mapping tables are supported.

If "L:Charsets/character-sets" or "L:Charsets/custom-character-sets" contains a MIME name for an 8-bit character set where no mapping table in "L:Charsets/" does not exist, and you have a mapping table in text form, use BuildMapTable to create the binary mapping table and reboot (diskfont.library searches tables only once) to be able to use the new character set (e.g. in fonts or catalog files).

The expected format of text mapping tables is as follows:

  • Anything from a '#' character to the end of a line is considered a comment.
  • A valid line does contain the index on the left and the Unicode point at the right side, in either hexadecimal (starting with 0x or 0X) or octal (starting with 0) or decimal form, separated by empty space.
Example

0xA4 0x20AC # EURO SIGN

Tool Types

(none)

Shell Usage

Format
BUILDMAPTABLE <ASCII mapping table> [CHARSET]
Template
UNICODEMAPTABLE/A,CHARSET/K
Location
SDK:C

The parameters are:

UNICODEMAPTABLE A character set mapping table file.
CHARSET A MIME character set name or alias.

The UNICODEMAPTABLE parameter specifies a character set mapping table file to be read and the CHARSET parameter the binary mapping table file to be written.

The MIME character set name obtained from diskfont.library will be used as file name of the binary character set mapping table which will be stored in "L:Charsets/". If the CHARSET parameter is omitted, no file will be written, instead the resulting mapping table is displayed in text form.

Example 1

Parse a text file "CP1258.TXT" and display a list of entries with the index on the left and the Unicode codepoint at the right side.

 1> BuildMapTable CP1258.TXT

Note: unmapped entries (with Unicode codepoint 0) are not displayed.

Example 2

Parse a text file "8859-1.TXT" and create a file "L:Charsets/ISO-8859-1" (latin1 is an alias for ISO-8859-1).

 1> BuildMapTable 8859-1.TXT CHARSET LATIN1

ARexx Interface

BuildMapTable has no ARexx interface.

BumpRev

BumpRev updates version and revision information and makes this available for program code to use it. It generates header file for C and Assembly language programs to use. The typical application is to "bump" (i.e. increment) the revision number of a program, library, device, etc. after it has been changed and before it is released.

Tool Types

(none)

Shell Usage

Format
BUMPREV [-q] [-v <version>] [-r <revision>] [-n <name>] [-b <base name>] [-d <depend list file>]
[-e <exclude suffix>] [-i <include suffix>] [-D] [-L] [<version> <base name> [<depend list file>]]
Template
[-q] [-v <version>] [-r <revision>] [-n <name>] [-b <base name>] [-d <depend list file>]
[-e <exclude suffix>] [-i <include suffix>] [-D] [-L] [<version> <base name> [<depend list file>]]
Location
SDK:C

The options are:

-q Activate "quiet" operation, i.e. will not print any warning or progress messages, but will print error message.
-v <version> Set the version number to use. This must be a number greater than 0. Note that version numbers greater than 255 are unsafe to use for some applications since a "struct Resident" only reserves an unsigned 8-bit integer for storing a version number in it.
-r <revision> Set the revision number to use rather than let BumpRev read and increment it instead. This must be a number greater than 0.
-n <name> Set the name of the program, library, device, etc. If it is not the same as the base name (see below). This can be useful for software built on systems which do not use a case-insensitive file system
-b <base name> Set the base file name all the work and header file names are generated from. This also becomes the name that is written to the files unless you override this with the -n option (see above).
-d <depend list file> A file which contains a list of file names whose modification times should be compared against the modification time of the file which contains the revision number. If any of these files has been modified after the revision number file has a new revision will be created; otherwise BumpRev will exit immediately. There must be one file name per line. Note that if you give "-" as the file name, BumpRev will try to read the file name list from standard input.
-e <exclude suffix> By default BumpRev generates three header files: one for use with C and two for use with Assembly. language The C header file name ends with ".h" and the two Assembly language file names end with ".i" and ".s", respectively. You can tell BumpRev not to create all of these files with the -e option.
-i <include suffix> This controls which header files should be created, with the default being the ".h", ".i", and ".s" files. The difference between the -i option and -e option is that with -i you say exactly what header files you want, and not what you do not want.
-D Add a DEVNAME definition to the output files.
-L Add a LIBNAME definition to the output files.

You can specify the base name, the version number and the dependencies file name both using options and as regular parameters. But you do not need to specify both. For example, the following commands are equivalent:

  BumpRev -b foo 1
  BumpRev 1 foo
  BumpRev -v 1 foo
  BumpRev -v 1 -b foo

The following commands are equivalent, too:

  BumpRev 1 bar dependencies_file
  BumpRev -b bar 1 dependencies_file
  BumpRev -v 1 -d dependencies_file bar
  BumpRev -v 1 -b bar dependencies_file
Example 1

Create or update a revision file "foo_rev.rev" unless it already exists, and create three more header files: "foo_rev.h", "foo_rev.1", and "foo_rev.s".

  1> BumpRev 1 foo
  BumpRev: Creating new file "foo_rev.rev"
  BumpRev: Bumped "foo" to version 1.1.

If you invoke BumpRev with the same parameters again, the revision file will be updated, incrementing the revision number. The three header files will be updated, too.

  1> BumpRev 1 foo
  BumpRev: Bumped "foo" to version 1.2.
Example 2

The name you give BumpRev goes into the names of the header files, and it also becomes the name printed in each string. This can be overridden with the -n option.

  1> BumpRev -n Bar 1 bar
  BumpRev: Creating new file "bar_rev.rev".
  BumpRev: Bumped "Bar" to version 1.1.

The resulting files still use the same base name, but the names printed in the files are different.

bar_rev.h

#define VERSION  1
#define REVISION 1
#define DATE     "15.6.2020"
#define VERS     "Bar 1.1"
#define VSTRING  "Bar 1.1 (15.6.2020)\r\n"
#define VERSTAG  "\0$VER: Bar 1.1 (15.6.2020)"
Example 3

BumpRev defaults to create three header files, but at times there may be only one you need. To create just the C language header file, you would use the -e option like this:

  1> BumpRev -e si 1 baz

This would create only "baz_rev.h" and omit "baz_rev.i" and "baz_rev.s".

ARexx Interface

BumpRev has no ARexx interface.

CatComp

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

ChangeRegs

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

DistCC

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

DistCCD

Missing description.

Tool Types

Shell Usage

ARexx Interface

DistCCMon-Amiga

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

DistCCMon-Text

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

Expunge

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

FDTrans

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

FSTest

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

FSVPTool

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

GDB

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

GMake

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

GUnZip

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

GZip

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

IDLTool

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

ListDynDep

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

Localize

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

Make

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

MakeAudioMode

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

ModList

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

SH

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

TAR

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface

USBSnoop

Missing description.

Tool Types

Shell Usage

Format
Template
Location
SDK:C

ARexx Interface