Copyright (c) Hyperion Entertainment and contributors.
AmigaOne X1000: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Steven Solie (talk | contribs) |
Steven Solie (talk | contribs) |
||
| Line 3: | Line 3: | ||
= Key Specifications = |
= Key Specifications = |
||
* ATX |
* ATX form factor |
||
* Dual core PWRficient PA6T-1682M 1.8 Ghz PowerISA v2.04+ CPU |
* Dual core PWRficient PA6T-1682M 1.8 Ghz PowerISA v2.04+ CPU |
||
* Xena Co-processor running at 500 Mhz with a |
* Xena Co-processor running at 500 Mhz with a XCore XS1-L2 124 SDS |
||
* ATI Radeon HD 1GB 4650 Graphics Card |
* ATI Radeon HD 1GB 4650 Graphics Card |
||
* 7.1 |
* 7.1 channel HD Audio |
||
* Memory 4xDDR2 SDRAM Slots |
|||
* 10 USB 2.0 |
* 10 USB 2.0 |
||
* |
* 1x Gigabit Ethernet |
||
* A range of PCIe and PCI slots |
* A range of PCIe and PCI slots |
||
| Line 21: | Line 23: | ||
* A Xorro and Compact Flash slot |
* A Xorro and Compact Flash slot |
||
* |
* 2x RS-232 serial ports |
||
| ⚫ | |||
* 1x PATA connector |
|||
| ⚫ | |||
* 1x JTAG connector |
|||
* 1xPATA and 1xJTAG connectors |
|||
= Manufacturer = |
= Manufacturer = |
||
Revision as of 14:57, 2 August 2013
The AmigaOne X1000 is a powerful PowerPC-based high-end computer now available for AmigaOS.
Key Specifications
- ATX form factor
- Dual core PWRficient PA6T-1682M 1.8 Ghz PowerISA v2.04+ CPU
- Xena Co-processor running at 500 Mhz with a XCore XS1-L2 124 SDS
- ATI Radeon HD 1GB 4650 Graphics Card
- 7.1 channel HD Audio
- Memory 4xDDR2 SDRAM Slots
- 10 USB 2.0
- 1x Gigabit Ethernet
- A range of PCIe and PCI slots
- A Xorro and Compact Flash slot
- 2x RS-232 serial ports
- 4x SATA2 connectors
- 1x PATA connector
- 1x JTAG connector
Manufacturer
A-Eon Technology is the manufacturer of the AmigaOne X1000 motherboard.
AmigaKit is the worldwide distributor of the AmigaOne X1000 System.
Troubleshooting Tips
X1000 Won't Reboot Reliably
- Turn off power to PSU.
- Remove plug from PSU.
- Remove power connector from the motherboard.
- Take out one RAM card leaving only one to the right of the PA6T CPU (i.e. closest to back of case).
- Plug power connector back input motherboard.
- Connect PSU power & switch on PSU.
- Turn on X1000.
If the X1000 boots up to Workbench, press and hold the power button for 3-5 seconds & it should shut off.